| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 10 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Air conditioner
|
Cooling the BESS.
|
|
Travel switch
|
When the BESS is detected to be on fire, aerosol is emitted to
extinguish the fire.
Check whether the BESS's door is closed.
|
|
Smoke detector
|
A device used to detect smoke in a fire and sound an alarm
when smoke is detected.
|
|
Heat detector
|
A device used to measure temperature and sound an
alarm if it detects excessive temperature.
|
|
Fire suppression water pipe
|
Fire suppression and cooling.
|
|
Aerosol Fire Suppression Device
|
When the BESS is detected to be on fire, aerosol is emitted to
extinguish the fire.
|
|
Manual service disconnect
|
In order to protect the safety of technicians servicing in high
voltage environments or respond to sudden events, the
connection of the high voltage
circuit can be quickly separated.
|
|
Fan
|
Emission of combustible gas
|
|
Combustible gas sensor
|
Detect combustible gases
|
|
Serial relay
|
Control system
|
|
Terminal line
|
For connecting cables
|
|
Switching Mode Power Supply
|
Power source
|
|
Combustible gas sensor
|
Detect combustible gases
|
|
Miniature circuit breaker
|
Controlled power-on and power-off
|
|
Water immersion sensor
|
Check the ESS for water leakage
|
|
Terminal line
|
Connect external cables
|
|
B-
|
Connection position of the common negative pole of the
battery
|
|
B+
|
Connection position of the common positive pole of the
battery
|
|
Air switch
|
Used to manually control the connection between the
battery rack and external devices
|
|
Alarm light indicator
|
Battery system fault alarm indicator
|
|
HV light indicator
|
High-voltage hazard indicator
|
|
PCS-
|
Connection position of PCS negative pole
|
|
PCS+
|
Connection position of PCS positive pole
|
|
USB
|
BMS upgrade interface and storage expansion interface
|
|
OUT COM
|
Connection position with next GE-F-PDU communication
output
|
|
IN COM
|
Connection position with previous GE-F-PDU
communication input
|
|
PCS COM
|
Communication interface with charging and discharging
equipment
|
|
START
|
A start switch of 12VDC power inside the high-voltage
control box
|
|
COMM1
|
Communicative connection with the cabinet
|
|
COMM2
|
Communicative connection with the first battery module;
and providing 12VDC power for the first battery module.
|
| Model | GE-F60 |
|
Main Parameter
|
|
|
Cell Chemistry
|
LiFePO4
|
|
Module Energy (kWh)
|
5.12
|
|
Module Nominal Voltage (V)
|
51.2
|
|
Module Capacity (Ah)
|
100
|
|
Battery Module Qty In Series (Optional)
|
12
|
|
System Nominal Voltage (V)
|
614.4
|
|
System Operating Voltage (V)
|
480~700
|
|
System Energy (kWh)
|
61.44
|
|
System Usable Energy (kWh)
|
55.29
|
|
Rated DC Power
|
61.44
|
|
Working Temperature (°C)
|
Working Temperature (°C)
|
|
Status Indicator
|
Yellow: Battery High Voltage Power On Red:
Battery System Alarm
|
|
Communication Port
|
CAN2.0/ RS485
|
|
Humidity
|
5%~85%RH
|
|
Altitude
|
≤2000m
|
|
IP Rating of Enclosure
|
IP55
|
|
Dimension (W/D/H,mm)
|
735x1045x2235
|
|
Weight Approximate (kg)
|
1010
|
|
Installation Location
|
Rack Mounting
|
|
Recommend Depth of Discharge
|
90%
|
|
Cycle Life
|
25±2°C,0.5C/0.5C, EOL70%≥6000
|
|
Warranty
|
10 years
|
|
Certification
|
UN38.3/CB/CE/CEC/IEC62040
|
Q1: How to choose the right inverter?
){kind=link}